|
T3 2011 - Conversion Set
#300945
Conversion set for T3 to convert it to the T3â™2011 spec. Includes all necessary parts such as chassis, top deck, dual steering system, lower shock membranes and shock foams, and long LiPo composite battery backstops.
|
|
|
T3 FRP Chassis 2.5mm - Rubber-Spec
#301129
CNC-machined 6-cell chassis of 2.5mm premium-grade graphite material, specially designed and optimized for rubber-tire racing. Features slots for 6-cell batteries. Accommodates 5- or 6-cell NiMH battery packs or a single LiPo battery. Fits XRAY T3.
|
|
|
T3 Graphite Chassis 3.0mm - Foam-Spec
#301130
CNC-machined 6-cell chassis of 3.0mm thick, premium-grade graphite material, specially designed and optimized for foam-tire racing. Features slots for 6-cell batteries. Accommodates 5- or 6-cell NiMH battery packs or a single LiPo battery. Fits XRAY T3.
|
|
|
T3 Graphite Upper Deck 2.0mm - Foam-Spec
#301191
CNC-machined upper deck of premium-grade 2.0mm thick graphite material, specially designed and optimized for foam-tire racing conditions. Fits XRAY T3.
|
|
|
Composite Bumper
#301202
Lower bumper holder made from tough composite material. Fits XRAY T2, T3 cars.
|
|
|
Foam Bumper - Hard
#301223
Foam bumper made from extra hard foam is a direct and perfect fit. Made from lightweight yet very stiff foam, it will protect the car better as it will not yield even in heavy crashes. Recommended for all racing conditions but especially for tracks with rigid or sharp perimeter boards.
|
|
|
T4 Foam Bumper - Hard
#301226
High-quality hard front foam bumper, hand-cut from specially-developed extra hard foam material. Very light, yet very strong. Protects front of car in serious collisions.
|
|
|
T4 Foam Bumper Wide - Hard
#301228
High-quality hard front foam bumper, hand-cut from specially-developed extra hard foam material. Protects front of car in serious collisions. Same dimensions as #301227 foam bumper.
|
|
|
Front Body Mount Set 6mm
#301322
Front body mount set includes redesigned 6mm-thick bodyposts and all other mounting hardware. Fits XRAY T2 and NT1.
|
|
|
Front Body Mount Set +1mm Height
#301323
XRAY presents +1mm height-adjustable body posts for the T2 and NT1. For serious racers who focus on the small details, body height plays a very important role in the performance of the car and as such, ultra-fine body height tuning was developed by XRAY R&D engineers to address this increasingly important tuning set-up feature.
|
|
|
Rear Body Mount Set 6mm
#301332
Rear body mount set includes redesigned 6mm-thick bodyposts and all other mounting hardware. Fits XRAY T2 and NT1.
|
|
|
Rear Body Mount Set +1mm Height
#301333
XRAY presents +1mm height-adjustable body posts for the T2 and NT1. For serious racers who focus on the small details, body height plays a very important role in the performance of the car and as such, ultra-fine body height tuning was developed by XRAY R&D engineers to address this increasingly important tuning set-up feature.
|
|
|
T3 Alu Upper Clamp with Adj. Roll-Center RR-FL - Orange
#302028-O
Ultra-light, ultra-strong upper clamp for bulkheads with adjustment roll-center positions, CNC-machined from premium Swiss 7075 T6 aluminum, orange color. Roll-center positions provide a great range of adjustments for both front and rear suspension roll centers.
|
|
|
T3 Alu Lower Suspension Holder - Orange
#302046-O
CNC-machined alu lower suspension holder which is part of all-new suspension holder system allows suspension arms to be mounted independently from the diff bulkheads. Orange color. Fits XRAY T3.
|
|
|
Alu Chassis Brace
#302054
Alu chassis brace is CNC-machined from high-grade aluminum. It is recommended for carpet tracks with medium to super-high traction.
|
|
|
Alu Chassis Brace - Black
#302054-K
Alu chassis brace is CNC-machined from high-grade aluminum. It is recommended for carpet tracks with medium to super-high traction. Black color.
|
|
|
Graphite Shock Tower Front 3.0mm - V2
#302087
CNC-machined front shock tower made from 3.0mm thick premium graphite material to guarantee maximum strength and long life. Low height allows the new shorter shocks to be mounted lower, thus lowering the CG even more and improving steering response. Specially machined for ultra-low weight without compromising strength. Fits XRAY T2, T3 cars.
|
|
|
Front Suspension Arm - Hard
#302161
Hard molded composite front lower suspension arm. Recommended for use in standard conditions or with rubber tires. Marked with âśHâť for easy identification. May be used on either left or right side.
|
|
|
Front Suspension Arm - Extra-Hard
#302162
Extra-hard molded composite front lower suspension arm. Recommended for use in high-grip conditions or with foam tires. Marked with âśXHâť for easy identification. May be used on either left or right side.
|
|
|
Front Susp. Arm - Extra-Hard - 1-Hole
#302164
Molded composite front lower suspension. Extra-hard composite mixture arms (labeled âśXHâť) for high-traction foam-tire racing. The specially-formulated composite material allows for a very light yet very durable suspension arm that can withstand the rigors of high-performance racing with foam tires. Can be also used for rubber tires. Fits XRAY T2, T3 cars.
|
|
|
Composite Front Susp. Arm 2-Hole - Hard
#302165
Molded composite front lower suspension arms with 2-holes for optional setting. Inner position is used for increased steering, outer position is used for more stable handling. Standard hard-composite mixture arms (labeled âśHâť) for rubber-tire racing. Can be also used for foam tires. Fits XRAY T3.
|
|
|
Composite Front Susp. Arm 2-Hole - X-Hard
#302166
Molded composite front lower suspension arms with 2-holes for optional setting. Inner position is used for increased steering, outer position is used for more stable handling. Extra-hard composite mixture arms (labeled âśXHâť) for high-traction foam-tire racing. Can be also used for rubber tires. Fits XRAY T3.
|
|
|
Comp. Front Susp. Arm 1-Hole - Graphite
#302167
Molded lightweight composite front lower suspension arm. The specially-formulated graphite composite material allows for a very light suspension arm that can withstand the rigors of high-performance racing.
|
|
|
Composite Steering Block - Medium - V2
#302252
Molded composite steering block of âśmediumâť hardness (M) for rubber-tire racing. The steering block features two Ackermann positions, and uses small but robust 5x10 ball-bearings to minimize unsprung weight. Can be also used for foam tires. Fits XRAY T2, T3 cars.
|
|
|
Alu Steering Block
#302256
Alu Steering Block for XRAY T2 is CNC-machined from premium lightweight T6 aluminum, polished for luxuriuous and stylish appearance. Ultra-strong construction provides very long life and durability in even the most extreme racing conditions.
|
|
|
Ball-Bearing Composite Bushing (4)
#302295
Molded composite bushings for installing ball-bearings in alu steering blocks (302256) and alu rear uprights (303358 and 303359). Set of 4.
|
|
|
Alu C-Hub Block - Caster 0° - Orange
#302334
CNC-machined highest-quality duraluminum C-hub for XRAY T4. Caster pre-set at 0 degrees. Engraved with "0" for easy identification. Fits left or right sides. Includes two nylon bushings.
|
|
|
Alu C-Hub Front Block Right - Caster 4° - Orange
#302337
CNC-machined highest-quality duaraluminum C-hub for right steering block of T2, T3. Caster pre-set at 4°. Engraved with "R4" to easy identification. Includes two nylon bushings. Use with left-side alu 4° C-hub #302338.
|
|
|
Alu C-Hub Front Block Left - Caster 4° - Orange
#302338
CNC-machined highest-quality duaraluminum C-hub for left steering block of T2, T3. Caster pre-set at 4°. Engraved with "L4" to easy identification. Includes two nylon bushings. Use with right-side alu 4° C-hub #302337.
|
|
|
Alu C-Hub Front Block Right - Caster 6° - Orange
#302339
CNC-machined highest-quality duaraluminum C-hub for right steering block of T2, T3. Caster pre-set at 6°. Engraved with "R6" to easy identification. Includes two nylon bushings. Use with left-side alu 6° C-hub #302340.
|
|
|
Alu C-Hub Front Block Left - Caster 6° - Orange
#302340
CNC-machined highest-quality duaraluminum C-hub for left steering block of T2, T3. Caster pre-set at 6°. Engraved with "L6" to easy identification. Includes two nylon bushings. Use with right-side alu 6° C-hub #302339.
|
|
|
Composite C-Hub Right - 2° Deg. - Medium (ECS)
#302361
Molded composite C-hub for right steering block of T2, T3. Caster pre-set at 2°. Medium rigidity for rubber-tire racing. Use with matching left-side C-hub #302362. Can be also used for foam tires.
|
|
|
Composite C-Hub Left - 2° Deg. - Medium (ECS)
#302362
Molded composite C-hub for left steering block of T2, T3. Caster pre-set at 2°. Medium rigidity for rubber-tire racing. Use with matching right-side C-hub #302361. Can be also used for foam tires.
|
|
|
Composite C-Hub Right - 4° Deg. - Medium
#302363
Molded composite C-hub for right steering block of T2, T3. Caster pre-set at 4°. Medium rigidity for rubber-tire racing. Use with matching left-side C-hub #302364. Can be also used for foam tires.
|
|
|
Composite C-Hub Left - 4° Deg. - Medium
#302364
Molded composite C-hub for left steering block of T2, T3. Caster pre-set at 4°. Medium rigidity for rubber-tire racing. Use with matching right-side C-hub #302363. Can be also used for foam tires.
|
|
|
Composite C-Hub Right - 6° Deg. - Medium (ECS)
#302365
Molded composite C-hub for right steering block of T2, T3. Caster pre-set at 6°. Medium rigidity for rubber-tire racing. Use with matching left-side C-hub #302366. Can be also used for foam tires.
|
|
|
Composite C-Hub Left - 6° Deg. - Medium (ECS)
#302366
Molded composite C-hub for left steering block of T2, T3. Caster pre-set at 6°. Medium rigidity for rubber-tire racing. Use with matching right-side C-hub #302365. Can be also used for foam tires.
|
|
|
Composite C-Hub Right - 0° Deg. - Hard (ECS)
#302369
Molded composite C-hub for right steering block. Caster pre-set at 0°. HARD rigidity for rubber-tire racing and also foam tire racing. Use with matching left-side C-hub #302370.
|
|
|
Composite C-Hub Left - 0° Deg. - Hard (ECS)
#302370
Molded composite C-hub for left steering block. Caster pre-set at 0°. HARD rigidity for rubber-tire racing and also foam tire racing. Use with matching right-side C-hub #302369.
|
|
|
Composite C-Hub Right - 2° Deg. - Hard (ECS)
#302371
Molded composite C-hub for right steering block of T2, T3. Caster pre-set at 2°. Hard rigidity for foam-tire racing. Use with matching left-side C-hub #302372. Can be also used for rubber tires.
|
|
|
Composite C-Hub Left - 2° Deg. - Hard (ECS)
#302372
Molded composite C-hub for left steering block of T2, T3. Caster pre-set at 2°. Hard rigidity for foam-tire racing. Use with matching right-side C-hub #302371. Can be also used for rubber tires.
|
|
|
Composite C-Hub Right - 4° Deg. - Hard (ECS)
#302373
Molded composite C-hub for right steering block of T2, T3. Caster pre-set at 4°. Hard rigidity for foam-tire racing. Use with matching left-side C-hub #302374. Can be also used for rubber tires.
|
|
|
Composite C-Hub Left - 4° Deg. - Hard (ECS)
#302374
Molded composite C-hub for left steering block of T2, T3. Caster pre-set at 4°. Hard rigidity for foam-tire racing. Use with matching right-side C-hub #302373. Can be also used for rubber tires.
|
|
|
Composite C-Hub Right - 6° Deg. - Hard
#302375
Molded composite C-hub for right steering block of T2, T3. Caster pre-set at 6°. Hard rigidity for foam-tire racing. Use with matching left-side C-hub #302376. Can be also used for rubber tires.
|
|
|
Composite C-Hub Left - 6° Deg. - Hard
#302376
Molded composite C-hub for left steering block of T2, T3. Caster pre-set at 6°. Hard rigidity for foam-tire racing. Use with matching right-side C-hub #302375. Can be also used for rubber tires.
|
|
|
Anti-Roll Bar Front (Set)
#302401
If your XRAY T2, T3 is oversteering, then try this optional front anti-roll bar set. The front anti-roll bar will decrease front chassis roll and decrease front traction, reducing your carâ™s steering. This complete front anti-roll bar set for the XRAY T2, T3 includes all necessary hardware, and includes three different anti-roll bars: 1.2, 1.4, and 1.6mm.
|
|
|
Anti-Roll Bar Front 1.2mm
#302482
Front anti-roll bar, 1.2mm dia, gold colour. Same bar as included in #302401 Front Anti-Roll Bar Set.
|
|
|
Anti-Roll Bar Front 1.3mm
#302483
Front anti-roll bar, 1.3mm dia, black colour. Optional bar for #302401 Front Anti-Roll Bar Set. Marked with 3 laser-engraved lines for easy identification.
|
|
|
Anti-Roll Bar Front 1.4mm
#302484
Front anti-roll bar, 1.4mm dia, silver colour. Same bar as included in #302401 Front Anti-Roll Bar Set.
|
|
|
Anti-Roll Bar Front 1.5mm
#302485
Front anti-roll bar, 1.5mm dia, black colour. Optional bar for #302401 Front Anti-Roll Bar Set. Marked with 5 laser-engraved lines for easy identification.
|
|
|
Anti-Roll Bar Front 1.6mm
#302486
Front anti-roll bar, 1.6mm dia, black colour. Same bar as included in #302401 Front Anti-Roll Bar Set.
|
|
|
Anti-Roll Bar Front 1.8mm
#302488
Front anti-roll bar, 1.8mm dia, black colour. Optional bar for #302401 Front Anti-Roll Bar Set. Marked with 8 laser-engraved lines for easy identification.
|
|
|
Alu Adjustable Turnbuckle 39mm M3 L/R - Orange (2)
#302612-O
For serious racers who are conscious of weight savings, XRAY offers adjustable left & right M3 steering turnbuckles manufactured from strong, lightweight 7075 T6 aluminum. Lighter by 50%. Precision threading for fine toe adjustment. Length of 39mm. Orange color. Set of 2.
|
|
|
Ball End 4.9mm With Thread 6mm (2)
#302653
Threaded 4.9mm ball end with 6mm thread for rear suspension on T2 family of cars to replace the ball + screw assembly. These balls are great for use with closed composite ball joints #302661 but also work with standard open ball joints. Set of 2.
|
|
|
Ball End 4.9mm With Thread 8mm - V2 (2)
#302654
Threaded 4.9mm ball end with 8mm thread for front suspension on T2 family of cars to replace the ball + screw assembly. These balls are great for use with closed composite ball joints #302661 but also work with standard open ball joints. Set of 2.
|
|
|
Ball End 4.9mm With Thread 10mm (2)
#302655
Threaded 4.9mm ball end with 10mm thread replaces ball+screw assembly on front suspension of the T2 & T3 family of cars. These ball ends are great for use with closed composite ball-joints #302661 but also work with standard open ball-joints. Set of 2.
|
|
|
Composite Ball Joint 4.9mm - Closed (4)
#302661
Molded composite steering ball-joint for T2 family of cars and T3. Fits 4.9mm pivot ball or ball stud. Set of 4.
The closed ball joint prevents dust from getting onto the ball end, allowing the upper camber links to move more freely. The closed ball joints must be used with ball ends #302653 or #302654; these ball ends are available in two lengths for front and rear suspension, respectively.
|
|
|
Alu Quick Roll-Center Holder™ 4.9mm H1 + H2
#303035
Matched pair of CNC-machined high-grade aluminum holders â” marked H1 and H2 â“ 1mm higher with the same length than L1 + L2 (lower) holders, allowing car to roll more. May be used at either front or rear.
|
|
|
Graphite Motor Guard
#303060
CNC-machined graphite motor guard for T1FKâ™05 and T2 protects the motor endbell from collisions. Includes mounting hardware.
|
|
|
Belt Tensioner Set T2'007, T2'008, T2'009, T3
#303071
Smart, easy-to-use XRAY Belt Tensioner Set for controlling center drive belt tension and twisting. High-quality components include CNC-machined lightweight alu mounting post, high-speed ball-bearings, and mounting hardware. Fits T2'007, T2'008, T2'009, T3 cars.
|
|
|
T3 Graphite Shock Tower Rear 3.0mm
#303089
CNC-machined super-low rear shock tower made from 3.0mm thick premium graphite material to guarantee maximum strength and long life. Low height allows the new shorter shocks to be mounted lower, thus lowering the CG even more and improving steering response. Fits XRAY T3.
|
|
|
Set of Alu Shims (1.0mm, 2.0mm, 3.0mm) – Silver
#303120
Ultimate assortment of set-up shims. You can use the shims for easy and accurate adjustment of:
- front and rear roll center
- front bump steer
- front and rear toe-in
- wheelbase
|
|
|
Set of Alu Shims (1.0mm, 2.0mm, 3.0mm) – Blue
#303121
Ultimate assortment of set-up shims. You can use the shims for easy and accurate adjustment of:
⢠front and rear roll center
⢠front bump steer
⢠front and rear toe-in
⢠wheelbase
|
|
|
Alu Shim 3x5x2.0mm - Orange (10)
#303140-O
Alu shims 3x5mm, 2.0mm thick which can be used for various purposes including roll center adjustment. Orange color. Set of 10.
Color may slightly vary between products.
|
|
|
Alu Shim 3x5x1.0 (10)
#303141
Alu shims, 1.0mm thick, for rear roll center adjustment on XRAY T2. Set of 10.
|
|
|
Rear Suspension Arm - Hard
#303161
Hard molded composite rear lower suspension arm. Recommended for use in standard conditions or with rubber tires. Marked with âśHâť for easy identification. May be used on either left or right side.
|
|
|
Rear Suspension Arm - Extra-Hard
#303162
Extra-hard molded composite rear lower suspension arm. Recommended for use in high-grip conditions or with foam tires. Marked with âśXHâť for easy identification. May be used on either left or right side.
|
|
|
Composite Rear Susp. Arm 1-Hole - Extra-Hard - V2
#303164
Molded composite rear lower suspension arm of extra-hard composite mixture (labeled âśXHâť) for foam-tire racing. The specially-formulated composite material allows for a very light yet very durable suspension arm that can withstand the rigors of high-performance racing with foam tires. Can be also used for rubber tires. Fits XRAY T2, T3 cars.
|
|
|
Composite Rear Susp. Arm 2-Hole - Hard
#303165
Molded composite rear lower suspension arms with 2-holes for optional setting. Inner position is used for increased steering, outer position is used for more stable handling. Standard hard-composite mixture arms (labeled âśHâť) for rubber-tire racing. The specially-formulated composite material allows for a very light yet very durable suspension arm that can withstand the rigors of high-performance racing with rubber tires. Can be also used for foam tires. Fits XRAY T2, T3 cars.
|
|
|
Composite Rear Susp. Arm 2-Hole - X-Hard
#303166
Molded composite rear lower suspension arms with 2-holes for optional setting. Inner position is used for increased steering, outer position is used for more stable handling. Extra-hard composite mixture arms (labeled âśXHâť) for foam-tire racing. The specially-formulated composite material allows for a very light yet very durable suspension arm that can withstand the rigors of high-performance racing with foam tires. Can be also used for rubber tires. Fits XRAY T2, T3 cars.
|
|
|
Comp. Rear Susp. Arm 1-Hole - Graphite
#303167
Molded lightweight composite rear lower suspension arm. The specially-formulated graphite composite material allows for a very light yet suspension arm that can withstand the rigors of high-performance racing.
|
|
|
Alu Adjustable Turnbuckle 26mm M3 L/R - Orange (2)
#303212-O
For serious racers who are conscious of weight savings, XRAY offers adjustable left & right M3 steering turnbuckles manufactured from strong, lightweight 7075 T6 aluminum. Lighter by 50%. Precision threading for fine toe adjustment. Length of 26mm. Orange color. Set of 2.
|
|
|
Composite Upright 1° Outboard Toe-In - Right - Medium
#303351
Molded-composite right rear upright features built-in 1° of outboard toe-in to improve the rotation of the car in corners and prevent suspension geometry changes in serious crashes. Medium rigidity (labeled âśMâť) specially optimized for rubber-tire racing. Use with matching left-side rear upright 303361. Can be also used for foam tires.
|
|
|
Composite Upright 0° Outboard Toe-In - Medium
#303352
Molded-composite rear upright features built-in 0° of outboard toe to improve traction and prevent suspension geometry changes in serious crashes. Medium rigidity (labeled âśMâť) specially optimized for rubber-tire racing. Use on both left and right sides of the car. Can be also used for foam tires.
|
|
|
Composite Upright 0° Outboard Toe-In - Hard
#303354
Molded-composite rear upright features built-in 0° of outboard toe to improve traction and prevent suspension geometry changes in serious crashes. Hard rigidity (labeled âśHâť) specially optimized for foam-tire racing. Use on both left and right sides of the car. Can be also used for rubber tires.
|
|
|
Alu Upright Rear 1° Outboard Toe-In (L+R)
#303358
CNC-machined rear upright made from premium lightweight T6 aluminum. Ultra-strong rear upright provides very long life and durability in even the most extreme racing conditions, features an integrated 1° outboard toe-in. Use of outboard toe-in will increase the corner speed. Complete set of left and right blocks.
|
|
|
Alu Upright Rear 2° Outboard Toe-In (L+R)
#303359
CNC-machined rear upright made from premium lightweight T6 aluminum. Ultra-strong rear upright provides very long life and durability in even the most extreme racing conditions, features an integrated 2° outboard toe-in. Use of outboard toe-in will increase the corner speed. Complete set of left and right blocks.
|
|
|
Composite Upright 1° Outboard Toe-In - Left - Medium
#303361
Molded-composite left rear upright features built-in 1° of outboard toe-in to improve the rotation of the car in corners and prevent suspension geometry changes in serious crashes. Medium rigidity (labeled âśMâť) specially optimized for rubber-tire racing. Use with matching right-side rear upright 303351. Can be also used for foam tires.
|
|
|
Composite Upright 0° Outboard Toe - Medium - 1-Hole
#303362
Molded-composite rear upright features built-in 0° of outboard toe to improve traction and prevent suspension geometry changes in serious crashes. This 1-hole upright may be used on high-traction tracks or tracks with long sweepers, since the position of the center hole will allow faster driving through those corners because of better cornering speed.
|
|
|
Composite Upright 0° Outboard Toe - Hard - 1-Hole
#303364
Molded-composite rear upright features built-in 0° of outboard toe to improve traction and prevent suspension geometry changes in serious crashes. This 1-hole upright may be used on high-traction tracks or tracks with long sweepers, since the position of the center hole will allow faster driving through those corners because of better cornering speed.
|
|
|
Anti-Roll Bar Rear (Set)
#303401
If your XRAY T2, T3 is understeering, then try this optional rear anti-roll bar set. The rear anti-roll bar will decrease rear chassis roll and decrease rear traction, increasing your carâ™s steering. This complete rear anti-roll bar set for the XRAY T2, T3 includes all necessary hardware, and includes three different anti-roll bars: 1.2, 1.4, and 1.6mm.
|
|
|
Composite Anti-Roll Bar Holders
#303411
Molded composite anti-roll bar holders, same as included in anti-roll bar sets #302401 (front) and #303401 (rear). Set of 8.
|
|
|
Alu 4.9mm Ball End (2)
#303431
Alu 4.9mm ball ends, same as included in anti-roll bar sets #302401 (front) and #303401 (rear). Set of 2.
|
|
|
Alu 4.9mm Ball End - Black (2)
#303431-K
Alu 4.9mm ball ends, same as included in anti-roll bar sets #302401 (front) and #303401 (rear). Set of 2. Black colour.
|
|
|
Alu Anti-Roll Bar Collar (2)
#303440
Alu anti-roll bar collars remove play from the front anti-roll bar wire, increasing cornering speed and stability. Intended for serious racers who desire maximum performance from their car. Fits all T2 cars. Set of 2 collars and setscrews.
|
|
|
Ball Joint 4.9mm - Open (4)
#303454
Molded composite 4.9mm ball joints for anti-roll bar links, same as included in anti-roll bar sets #302401 (front) and #303401 (rear). Set of 4.
|
|
|
Anti-Roll Bar Rear 1.1mm
#303481
T2, T3 rear anti-roll bar, 1.1mm dia, black colour. Optional bar for #303401 Rear Anti-Roll Bar Set. Marked with 1 laser-engraved line for easy identification.
|
|
|
Anti-Roll Bar Rear 1.2mm
#303482
T2, T3 rear anti-roll bar, 1.2mm dia, gold colour. Same bar as included in #303401 Rear Anti-Roll Bar Set.
|
|
|
Anti-Roll Bar Rear 1.3mm
#303483
T2, T3 rear anti-roll bar, 1.3mm dia, black colour. Optional bar for #303401 Rear Anti-Roll Bar Set. Marked with 3 laser-engraved lines for easy identification.
|
|
|
Anti-Roll Bar Rear 1.4mm
#303484
T2, T3 rear anti-roll bar, 1.4mm dia, silver colour. Same bar as included in #303401 Rear Anti-Roll Bar Set.
|
|
|
Anti-Roll Bar Rear 1.5mm
#303485
T2, T3 rear anti-roll bar, 1.5mm dia, black colour. Optional bar for #303401 Rear Anti-Roll Bar Set. Marked with 5 laser-engraved lines for easy identification.
|
|
|
Anti-Roll Bar Rear 1.6mm
#303486
T2, T3 rear anti-roll bar, 1.6mm dia, black colour. Same bar as included in #303401 Rear Anti-Roll Bar Set.
|
|
|
Screw For External Diff Adjustment
#305040
Special screw for external diff adjustment. Manufactured exclusively by HUDY from world-renowned top-secret "Hudy Spring Steel".
|
|
|
Diff Pulley 34T with Labyrinth Dust Covers
#305054
Molded-composite 34T diff pulley with XRAYâ™s innovative yet very smart Labyrinth Dust Cover™ diff protection system which has been carried over from the previous T1/T2 platforms where it has been very successfully used for many years. For T2â™008, T2'009, T3 US Foam-spec Edition ball differential.
|
|
|
Diff Washer 17x23x1 (2)
#305082
Two diff washers for ball-differentials. Each side of the washer has a distinct finish; a polished side against which the diff balls ride, and a rougher machined side that contacts the duraluminum diff output. Specially hardened to assure maximum life.
|
|
|
XRAY Multi-Diff T2'008, T2'009, T3
#305104
The unique Multi-Diff™ caused a sensation in RC car racing when it was first introduced, and the updated version is no different. The Multi-Diff™ has 3 different settings.
|
|
|
XRAY Multi-Differential T3 LiPo
#305105
The unique Multi-Diff™ caused a sensation in RC car racing when it was first introduced, and the updated version is no different. The Multi-Diff™ T3 LiPo has 3 different settings.
|
|
|
Multi-Diff Main Axle T2'008, T2'009, T3
#305116
CNC-machined lightweight aluminum main axle includes factory-pressed (non-replaceable) high-quality German one-way bearings, hand-ground for maximum running precision and strength. Fits #305104 Multi-Diff™ for XRAY T2'008, T2'009, T3 only.
|
|
|
Multi-Diff Locking Axle - Spring Steel
#305121
Multi-Diff™ locking axle is CNC-machined from Hudy Spring Steel™. Fits both #305102 and #305103 Multi-Diffs™ for all XRAY T1 cars. Must only be used with #305131 Inner Driveshaft Adapters.
|
|
|
Inner Driveshaft Adapter 3.5mm - Spring Steel (2)
#305132
Precision-machined, specially-lightened outdrives for use with XRAY T2'008 Multi-Diff™ axle. Will fit only 3.5mm drive shaft replacement plastic caps (#305241). The new lightweight one-way outdrives have a hex hole machined at each end. Madefrom world-renowned HUDY Spring Steel™ for high strength and durability. Set of 2.
|
|
|
Timing Belt Pulley 38T for Multi-Diff
#305158
Molded-composite 38T pulley and side covers for #305104 XRAY Multi-Diff™ for T2â™008, T2'009, T3 EU Rubber-spec Edition. The teeth number (38) is embossed into the side of the pulley for easy identification.
|
|
|
Composite Solid Axle 34T - Set
#305184
Unique lightweight composite front solid axle 34T for XRAY T2â™008, T2'009, T3 US Foam-spec Edition. The new composite solid axle has a very stiff structure and ultra-light weight that was achieved by injecting the entire solid axle from XRAYâ™s own self-designed & mixed lightweight composite material.
|
|
|
ECS Drive Shaft 50mm - HUDY Spring Steel™
#305225
CNC-machined 50mm ECS drive shaft made from world-renowned top-secret HUDY Spring Steel™. This race-quality drive shaft is a spare part for #305325 Equalized Corner Speed (ECS) Drive Shaft 50mm - Hudy Spring Steel™ (1), exclusively manufactured by HUDY.
|
|
|
ECS Drive Shaft 52mm - HUDY Spring Steel™
#305227
CNC-machined 52mm ECS drive shaft made from world-renowned top-secret HUDY Spring Steel™. This race-quality drive shaft is a spare part for #305327 Equalized Corner Speed (ECS) Drive Shaft 52mm - Hudy Spring Steel™ (1), exclusively manufactured by HUDY.
|
|
|
Drive Shaft 50mm - Hudy Spring Steel™
#305323
CNC-machined 50mm drive shaft for XRAY T2,T3 made from world-renowned top-secret HUDY Spring Steel™. This race-quality drive shaft is the smallest in the world, exclusively manufactured by HUDY.
|
|
|
Drive Shaft 52mm - Hudy Spring Steel™
#305324
CNC-machined 52mm CVD drive shaft made from world-renowned top-secret HUDY Spring Steel™. This race-quality drive shaft is the smallest in the world, exclusively manufactured by HUDY. Drive shaft diff end has been strategically lightened to reduce rotating mass without compromising strength.
|
|
|
Alu Wheel Hub (2)
#305350
CNC-machined clamping-style alu wheel hubs for XRAY T2, T3. Set of two.
|
|
|
Alu Wheel Hub - Offset +1.5mm (2)
#305353
CNC-machined clamping-style alu wheel hub for T2, T3 features 1.5mm offset to give wider track-width. Set of 2 includes clamping screws.
|
|
|
ECS Drive Shaft Pin 1.5 x 8.5 - V3 (2)
#305390
Polished chrome pin for ECS drive shaft, 1.5 x 8.5mm. Specially hand-ground for maximum precision. To help prevent of loosening of the setscrew from the ECS shaft, XRAY recommends using these new pins with flat spots. The flat spots allow the setscrew to better settle into the coupling. Set of 2.
|
|
|
ECS Drive Shaft Pin 1.5 x 9 (2)
#305391
Polished chrome pin for ECS drive shaft, 1.5 x 9mm. Specially hand-ground for maximum precision. To help prevent of loosening of the setscrew from the ECS shaft, XRAY recommends using these new pins with flat spots. The flat spots allow the setscrew to better settle into the coupling. Set of 2.
|
|
|
High-Performance Drive Belt Front 3x507mm
#305431
Ultra-Flex High-Performance Drive Belt
For top competition racing XRAY offers these specially modified high-performance drive belts. The belts are very thin and elastic as possible to create much more effective transmissions, save batteries and eliminate friction. The belt is specially modified - hand ground on a special machine so the belt is as thin as possible, but in such a way that it will still have long life.
"A must have item for serious racers."
|
|
|
Alu Solid Layshaft - Black
#305521-K
Alu middle layshaft for T2â™009, T3 has been strategically CNC-machined to minimize rotating weight without compromising strength or integrity. Black colour.
|
|
|
Alu Solid Layshaft - Orange
#305521-O
Alu middle layshaft for T2â™009, T3 has been strategically CNC-machined to minimize rotating weight without compromising strength or integrity. The hollow layshaft is perfectly round with zero runout, eliminating drivetrain vibration and producing a positive balance. The perfectly flat spur gear mounting surface reduces gear wobble. Orange colour.
|
|
|
Pinion Gear Steel 21T/48
#305621
High-performance 21 tooth, 48 pitch pinion gear.
Manufactured from special steel, this high-performance pinion gear is made by XRAY.
|
|
|
Pinion Gear Steel 23T/48
#305623
High-performance 23 tooth, 48 pitch pinion gear.
Manufactured from special steel, this high-performance pinion gear is made by XRAY.
|
|
|
Pinion Gear Steel 24T/48
#305624
High-performance 24 tooth, 48 pitch pinion gear.
Manufactured from special steel, this high-performance pinion gear is made by XRAY.
|
|
|
Pinion Gear Steel 27T/48
#305627
High-performance 27 tooth, 48 pitch pinion gear.
Manufactured from special steel, this high-performance pinion gear is made by XRAY.
|
|
|
Pinion Gear Steel 29T/48
#305629
High-performance 29 tooth, 48 pitch pinion gear.
Manufactured from special steel, this high-performance pinion gear is made by XRAY.
|
|
|
Pinion Gear Steel 30T/48
#305630
High-performance 30 tooth, 48 pitch pinion gear.
Manufactured from special steel, this high-performance pinion gear is made by XRAY.
|
|
|
Pinion Gear Steel 31T/48
#305631
High-performance 31 tooth, 48 pitch pinion gear.
Manufactured from special steel, this high-performance pinion gear is made by XRAY.
|
|
|
Pinion Gear Steel 32T/48
#305632
High-performance 32 tooth, 48 pitch pinion gear.
Manufactured from special steel, this high-performance pinion gear is made by XRAY.
|
|
|
Pinion Gear Steel 33T/48
#305633
High-performance 33 tooth, 48 pitch pinion gear.
Manufactured from special steel, this high-performance pinion gear is made by XRAY.
|
|
|
Pinion Gear Steel 34T/48
#305634
High-performance 34 tooth, 48 pitch pinion gear.
Manufactured from special steel, this high-performance pinion gear is made by XRAY.
|
|
|
Pinion Gear Alu Hard Coated 17T / 48
#305717
High-performance 17T / 48 pinion gear
Manufactured from special lightweight aircraft duraluminum to have lowest weight. Made by XRAY on a specially modified precision gear machine, which has ultra-precise tolerances and assures unparalleled concentricity. All edges are chamfered and pinions are run-in, afterwards specially treated to give them an even hardcoat so they stay absolute true for a long time.
|
|
|
Pinion Gear Alu Hard Coated 18T / 48
#305718
High-performance 20T / 48 pinion gear
Manufactured from special lightweight aircraft duraluminum to have lowest weight. Made by XRAY on a specially modified precision gear machine, which has ultra-precise tolerances and assures unparalleled concentricity. All edges are chamfered and pinions are run-in, afterwards specially treated to give them an even hardcoat so they stay absolute true for a long time.
|
|
|
Pinion Gear Alu Hard Coated 20T / 48
#305720
High-performance 20T / 48 pinion gear
Manufactured from special lightweight aircraft duraluminum to have lowest weight. Made by XRAY on a specially modified precision gear machine, which has ultra-precise tolerances and assures unparalleled concentricity. All edges are chamfered and pinions are run-in, afterwards specially treated to give them an even hardcoat so they stay absolute true for a long time.
|
|
|
Pinion Gear Alu Hard Coated 22T / 48
#305722
High-performance 22T / 48 pinion gear
Manufactured from special lightweight aircraft duraluminum to have lowest weight. Made by XRAY on a specially modified precision gear machine, which has ultra-precise tolerances and assures unparalleled concentricity. All edges are chamfered and pinions are run-in, afterwards specially treated to give them an even hardcoat so they stay absolute true for a long time.
|
|
|
Pinion Gear Alu Hard Coated 23T / 48
#305723
High-performance 23T / 48 pinion gear
Manufactured from special lightweight aircraft duraluminum to have lowest weight. Made by XRAY on a specially modified precision gear machine, which has ultra-precise tolerances and assures unparalleled concentricity. All edges are chamfered and pinions are run-in, afterwards specially treated to give them an even hardcoat so they stay absolute true for a long time.
|
|
|
Pinion Gear Alu Hard Coated 24T / 48
#305724
High-performance 24T / 48 pinion gear
Manufactured from special lightweight aircraft duraluminum to have lowest weight. Made by XRAY on a specially modified precision gear machine, which has ultra-precise tolerances and assures unparalleled concentricity. All edges are chamfered and pinions are run-in, afterwards specially treated to give them an even hardcoat so they stay absolute true for a long time.
|
|
|
Pinion Gear Alu Hard Coated 29T / 48
#305729
High-performance 29T / 48 pinion gear
Manufactured from special lightweight aircraft duraluminum to have lowest weight. Made by XRAY on a specially modified precision gear machine, which has ultra-precise tolerances and assures unparalleled concentricity. All edges are chamfered and pinions are run-in, afterwards specially treated to give them an even hardcoat so they stay absolute true for a long time.
|
|
|
Pinion Gear Alu Hard Coated 30T / 48
#305730
High-performance 30T / 48 pinion gear
Manufactured from special lightweight aircraft duraluminum to have lowest weight. Made by XRAY on a specially modified precision gear machine, which has ultra-precise tolerances and assures unparalleled concentricity. All edges are chamfered and pinions are run-in, afterwards specially treated to give them an even hardcoat so they stay absolute true for a long time.
|
|
|
Pinion Gear Alu Hard Coated 31T / 48
#305731
High-performance 31T / 48 pinion gear
Manufactured from special lightweight aircraft duraluminum to have lowest weight. Made by XRAY on a specially modified precision gear machine, which has ultra-precise tolerances and assures unparalleled concentricity. All edges are chamfered and pinions are run-in, afterwards specially treated to give them an even hardcoat so they stay absolute true for a long time.
|
|
|
Offset Spur Gear 78T/48
#305778
XRAY precision molded offset spur gear 78 tooth, 48 pitch. This spur gear has been strategically lightened to reduce rotating mass.
|
|
|
Offset Spur Gear 81T/48
#305781
XRAY precision molded offset spur gear 81 tooth, 48 pitch. This spur gear has been strategically lightened to reduce rotating mass.
|
|
|
Spur Gear 87T/48
#305787
XRAY precision molded spur gear 87 tooth, 48 pitch. This spur gear has been strategically lightened to reduce rotating mass.
|
|
|
Composite Offset Spur Gear 92T / 64
#305862
XRAY presents new additions to the range of precision-molded 64-pitch offset spur gears made from special hard composite material, strategically lightened to reduce rotating mass without compromising strength or durability.
|
|
|
Composite Offset Spur Gear 96T / 64
#305866
XRAY presents new additions to the range of precision-molded 64-pitch offset spur gears made from special hard composite material, strategically lightened to reduce rotating mass without compromising strength or durability.
|
|
|
Composite Offset Spur Gear 99T / 64
#305869
Addition to the range of precision-molded 64-pitch offset spur gears made from special hard composite material, strategically lightened to reduce rotating mass without compromising strength or durability.
|
|
|
Composite Offset Spur Gear 100T / 64
#305870
XRAY presents new additions to the range of precision-molded 64-pitch offset spur gears made from special hard composite material, strategically lightened to reduce rotating mass without compromising strength or durability.
|
|
|
Offset Spur Gear 104T/64
#305874
XRAY precision molded offset spur gear 104 tooth, 64 pitch. This spur gear has been strategically lightened to reduce rotating mass.
|
|
|
Offset Spur Gear 106T/64
#305876
XRAY precision molded offset spur gear 106 tooth, 64 pitch. This spur gear has been strategically lightened to reduce rotating mass.
|
|
|
Offset Spur Gear 108T/64
#305878
XRAY precision molded offset spur gear 108 tooth, 64 pitch. This spur gear has been strategically lightened to reduce rotating mass.
|
|
|
Offset Spur Gear 110T/64
#305880
XRAY precision molded offset spur gear 110 tooth, 64 pitch. This spur gear has been strategically lightened to reduce rotating mass.
|
|
|
Offset Spur Gear 112T/64
#305882
XRAY precision molded offset spur gear 112 tooth, 64 pitch. This spur gear has been strategically lightened to reduce rotating mass.
|
|
|
Offset Spur Gear 114T/64
#305884
XRAY precision molded offset spur gear 114 tooth, 64 pitch. This spur gear has been strategically lightened to reduce rotating mass.
|
|
|
Offset Spur Gear 116T/64
#305886
XRAY precision molded offset spur gear 116 tooth, 64 pitch. This spur gear has been strategically lightened to reduce rotating mass.
|
|
|
Offset Spur Gear 118T/64
#305888
XRAY precision molded offset spur gear 118 tooth, 64 pitch. This spur gear has been strategically lightened to reduce rotating mass.
|
|
|
Narrow Pinion Gear Alu Hard Coated 12T/48
#305912
Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear.
|
|
|
Narrow Pinion Gear Alu Hard Coated 13T/48
#305913
Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear.
|
|
|
Narrow Pinion Gear Alu Hard Coated 14T/48
#305914
Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear.
|
|
|
Narrow Pinion Gear Alu Hard Coated 15T/48
#305915
Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear.
|
|
|
Narrow Pinion Gear Alu Hard Coated 16T/48
#305916
Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear.
|
|
|
Narrow Pinion Gear Alu Hard Coated 17T/48
#305917
Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear.
|
|
|
Narrow Pinion Gear Alu Hard Coated 18T/48
#305918
Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear.
|
|
|
Narrow Pinion Gear Alu Hard Coated 19T/48
#305919
Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear.
|
|
|
Narrow Pinion Gear Alu Hard Coated 20T/48
#305920
Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear.
|
|
|
Narrow Pinion Gear Alu Hard Coated 21T/48
#305921
Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear.
|
|
|
Narrow Pinion Gear Alu Hard Coated 22T/48
#305922
Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear.
|
|
|
Narrow Pinion Gear Alu Hard Coated 23T/48
#305923
Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear.
|
|
|
Narrow Pinion Gear Alu Hard Coated 24T/48
#305924
Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear.
|
|
|
Narrow Pinion Gear Alu Hard Coated 25T/48
#305925
Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear.
|
|
|
Narrow Pinion Gear Alu Hard Coated 26T/48
#305926
Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear.
|
|
|
Narrow Pinion Gear Alu Hard Coated 27T/48
#305927
Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear.
|
|
|
Narrow Pinion Gear Alu Hard Coated 28T/48
#305928
Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear.
|
|
|
Narrow Pinion Gear Alu Hard Coated 29T/48
#305929
Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear.
|
|
|
Narrow Pinion Gear Alu Hard Coated 30T/48
#305930
Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear.
|
|
|
Narrow Pinion Gear Alu Hard Coated 31T/48
#305931
Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear.
|
|
|
Narrow Pinion Gear Alu Hard Coated 32T/48
#305932
Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear.
|
|
|
Narrow Pinion Gear Alu Hard Coated 33T/48
#305933
Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear.
|
|
|
Narrow Pinion Gear Alu Hard Coated 34T/48
#305934
Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear.
|
|
|
Narrow Pinion Gear Alu Hard Coated 18T/64
#305968
Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear.
|
|
|
Narrow Pinion Gear Alu Hard Coated 19T/64
#305969
Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear.
|
|
|
Narrow Pinion Gear Alu Hard Coated 20T/64
#305970
Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear.
|
|
|
Narrow Pinion Gear Alu Hard Coated 21T/64
#305971
Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear.
|
|
|
Narrow Pinion Gear Alu Hard Coated 22T/64
#305972
Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear.
|
|
|
Narrow Pinion Gear Alu Hard Coated 23T/64
#305973
Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear.
|
|
|
Narrow Pinion Gear Alu Hard Coated 24T/64
#305974
Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear.
|
|
|
Narrow Pinion Gear Alu Hard Coated 25T/64
#305975
Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear.
|
|
|
Narrow Pinion Gear Alu Hard Coated 26T/64
#305976
Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear.
|
|
|
Narrow Pinion Gear Alu Hard Coated 27T/64
#305977
Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear.
|
|
|
Narrow Pinion Gear Alu Hard Coated 28T/64
#305978
Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear.
|
|
|
Narrow Pinion Gear Alu Hard Coated 29T/64
#305979
Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear.
|
|
|
Narrow Pinion Gear Alu Hard Coated 30T/64
#305980
Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear.
|
|
|
Narrow Pinion Gear Alu Hard Coated 31T/64
#305981
Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear.
|
|
|
Narrow Pinion Gear Alu Hard Coated 32T/64
#305982
Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear.
|
|
|
Narrow Pinion Gear Alu Hard Coated 33T/64
#305983
Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear.
|
|
|
Narrow Pinion Gear Alu Hard Coated 34T/64
#305984
Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear.
|
|
|
Narrow Pinion Gear Alu Hard Coated 35T/64
#305985
Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear.
|
|
|
Narrow Pinion Gear Alu Hard Coated 36T/64
#305986
Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear.
|
|
|
Narrow Pinion Gear Alu Hard Coated 37T/64
#305987
Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear.
|
|
|
Narrow Pinion Gear Alu Hard Coated 38T/64
#305988
Narrow high-performance pinion gear manufactured from special lightweight aircraft duraluminum is 1.5mm thinner and 25% lighter than the regular-size pinion gear.
|
|
|
Narrow Pinion Gear Alu Hard Coated 40T/64
#305990
These narrow pinions are manufactured by XRAY on a specially-modified precision gear machine which has ultra-precise tolerances and assures unparalleled concentricity. After machining, the edges of pinions are chamfered and then the pinions are run in. The pinions are then specially treated to give them an even hardcoating so they stay absolutely true for a long time.
|
|
|
Alu Narrow Pinion Gear 41T / 64 - Hardcoated
#305991
These narrow pinions are manufactured by XRAY on a specially-modified precision gear machine which has ultra-precise tolerances and assures unparalleled concentricity. After machining, the edges of pinions are chamfered and then the pinions are run in. The pinions are then specially treated to give them an even hardcoating so they stay absolutely true for a long time.
|
|
|
Narrow Pinion Gear Alu Hard Coated 42T/64
#305992
These narrow pinions are manufactured by XRAY on a specially-modified precision gear machine which has ultra-precise tolerances and assures unparalleled concentricity. After machining, the edges of pinions are chamfered and then the pinions are run in. The pinions are then specially treated to give them an even hardcoating so they stay absolutely true for a long time.
|
|
|
Narrow Pinion Gear Alu Hard Coated 44T/64
#305994
These narrow pinions are manufactured by XRAY on a specially-modified precision gear machine which has ultra-precise tolerances and assures unparalleled concentricity. After machining, the edges of pinions are chamfered and then the pinions are run in. The pinions are then specially treated to give them an even hardcoating so they stay absolutely true for a long time.
|
|
|
Narrow Pinion Gear Alu Hard Coated 46T/64
#305996
These narrow pinions are manufactured by XRAY on a specially-modified precision gear machine which has ultra-precise tolerances and assures unparalleled concentricity. After machining, the edges of pinions are chamfered and then the pinions are run in. The pinions are then specially treated to give them an even hardcoating so they stay absolutely true for a long time. v
|
|
|
Narrow Pinion Gear Alu Hard Coated 48T/64
#305998
These narrow pinions are manufactured by XRAY on a specially-modified precision gear machine which has ultra-precise tolerances and assures unparalleled concentricity. After machining, the edges of pinions are chamfered and then the pinions are run in. The pinions are then specially treated to give them an even hardcoating so they stay absolutely true for a long time.
|
|
|
Narrow Pinion Gear Alu Hard Coated 50T/64
#306000
These narrow pinions are manufactured by XRAY on a specially-modified precision gear machine which has ultra-precise tolerances and assures unparalleled concentricity. After machining, the edges of pinions are chamfered and then the pinions are run in. The pinions are then specially treated to give them an even hardcoating so they stay absolutely true for a long time.
|
|
|
6-Cell Graphite Battery Strap w/ Alu Stands (Set)
#306163
Pre-assembled 6-cell graphite battery strap for XRAY T2, T3 features the XRAY smart battery holder system and new battery tweak-free mounting system. The alu capture wheel enables you to easily close and secure the battery strap without any clips.
|
|
|
Graphite Battery Strap for LiPo/NiMH - Black - Set
#306163-K
Pre-assembled 6-cell graphite battery strap for XRAY T2, T3 features the XRAY smart battery holder system and new battery tweak-free mounting system. The alu capture wheel enables you to easily close and secure the battery strap without any clips. Black color.
|
|
|
T3 Alu Low Top Deck Mount - Black (2)
#306515-K
CNC-machined alu stands for connecting top deck and chassis, increases torsional stiffness. Black color. Set of 2. Fits XRAY T3 only; not for use on T2 cars.
|
|
|
Alu Shock Spring Retaining Collar (4)
#308031
Aluminum CNC-machined shock collars that can be used on the XRAY shock absorbers to increase the durability. Stylish and lightweight collars are CNC-machined from premium Swiss 7075 T6 aluminum and are strategically lightened.
|
|
|
Alu XRAY Shock Spring Retaining Collar - Orange (4)
#308031-O
Aluminum CNC-machined shock collars that can be used on the XRAY shock absorbers to increase the durability. Stylish and lightweight collars are CNC-machined from premium Swiss 7075 T6 aluminum and are strategically lightened. Set of four. Orange color.
|
|
|
Composite Non-Adjustable Pistons - V3
#308036
Set of composite molded shock pistons for 2 shock absorbers. Includes pistons with 2 holes and 3 holes. Each piston type is available with three different-sized holes for damping adjustment: 1.1mm, 1.2mm, and 1.3mm holes (2 per piston).
|
|
|
Shock Adj. Nut Alu + O-ring - Orange
#308040-O
Set of four alu. spring-tension adjusting nuts and four O-rings to be inserted in them. O-rings prevent adjusting nuts from coming loose. Orange colour.
|
|
|
Shock Absorber Membranes - Low
#308081
Silicon-rubber compensation membranes for shock absorbers. All-new low-profile shock membranes allow for easier shock rebound adjustment.
|
|
|
Shock Foam Insert - Low (4)
#308091
Foam inserts for XRAY shocks, go between shock upper mount and rubber membrane. All-new low-profile shock foam inserts allow for easier shock rebound adjustment.
|
|
|
XRAY Shock Absorber-Set 4-Step - Short - Orange (2)
#308302-O
Set of parts to make two (2) complete XRAY shock absorbers (front or rear) for the XRAY T2â™009, T3. The T2â™009, T3 feature shorter, race-proven, externally-adjustable racing shocks. The new shorter shock body and shock shaft were designed for improved suspension lift and lower CG. Orange colour.
|
|
|
Composite Shock Parts - Rebound Hole - Short
#308332
One frame containing composite parts (except pistons) for two XRAY short shock absorbers. These new shock parts feature the upper shock cap with a hole which allows for faster, easier and more comfortable shocks rebound adjustment. Fits all XRAY electric and nitro touring shocks.
|
|
|
XRAY Spring-Set C = 2.2 (2)
#308373
New ultimate-match shock springs (C = 2.2) for XRAY T2 shocks. Stylish black finish. Laser-engraved value (2.2) on top spring coil for easy identification. Set of 2.
|
|
|
XRAY Spring-Set C = 2.4 (2)
#308374
New ultimate-match shock springs (C = 2.4) for XRAY T2 shocks. Stylish black finish. Laser-engraved value (2.4) on top spring coil for easy identification. Set of 2.
|
|
|
XRAY Spring-Set C = 2.6 (2)
#308375
New ultimate-match shock springs (C = 2.6) for XRAY T2 shocks. Stylish black finish. Laser-engraved value (2.6) on top spring coil for easy identification. Set of 2.
|
|
|
XRAY Spring-Set C = 2.8 (2)
#308376
New ultimate-match shock springs (C = 2.8) for XRAY T2 shocks. Stylish black finish. Laser-engraved value (2.8) on top spring coil for easy identification. Set of 2.
|
|
|
XRAY Spring-Set C = 3.0 (2)
#308377
New ultimate-match shock springs (C = 3.0) for XRAY T2 shocks. Stylish black finish. Laser-engraved value (3.0) on top spring coil for easy identification. Set of 2.
|
|
|
XRAY Spring-Set C = 3.2 (2)
#308378
New ultimate-match shock springs (C = 3.2) for XRAY T2 shocks. Stylish black finish. Laser-engraved value (3.2) on top spring coil for easy identification. Set of 2.
|
|
|
XRAY Spring-Set C = 3.4 (2)
#308379
New ultimate-match shock springs (C = 3.4) for XRAY T2 shocks. Stylish black finish. Laser-engraved value (3.4) on top spring coil for easy identification. Set of 2.
|
|
|
Additional XRAY Ultimate Racing Springs (20)
#308380
For even more fine tuning of suspension dampening, XRAY offers an additional set of ultra-fine tuning springs in addition to the basic set (#308390) of XRAY springs. The ultra-fine tuning springs have different damping and compression characteristics that fall between the range of the springs in the basic set.
|
|
|
XRAY Spring-Set D=1.5 (15 LB) Blue-Green (4)
#308384
For even more fine tuning of suspension dampening, XRAY offers an additional ultra-fine tuning springs in addition to the basic XRAY springs. The ultra-fine tuning springs have different damping and compression characteristics that fall between the range of the basic springs. All 4 springs within the set have the same length and damping characteristics.
|
|
|
XRAY Spring-Set D=1.6 (20 LB) Light-Blue (4)
#308385
For even more fine tuning of suspension dampening, XRAY offers an additional ultra-fine tuning springs in addition to the basic XRAY springs. The ultra-fine tuning springs have different damping and compression characteristics that fall between the range of the basic springs. All 4 springs within the set have the same length and damping characteristics.
|
|
|
XRAY Spring-Set D=1.7 (25 LB) Dark-Blue (4)
#308386
For even more fine tuning of suspension dampening, XRAY offers an additional ultra-fine tuning springs in addition to the basic XRAY springs. The ultra-fine tuning springs have different damping and compression characteristics that fall between the range of the basic springs. All 4 springs within the set have the same length and damping characteristics.
|
|
|
XRAY Spring-Set D=1.8 (30 LB) C=4.5 (4)
#308387
For even more fine tuning of suspension dampening, XRAY offers an additional ultra-fine tuning springs in addition to the basic XRAY springs. The ultra-fine tuning springs have different damping and compression characteristics that fall between the range of the basic springs. All 4 springs within the set have the same length and damping characteristics.
|
|
|
XRAY Spring-Set D=1.9 (35 LB) Light-Red (4)
#308388
For even more fine tuning of suspension dampening, XRAY offers an additional ultra-fine tuning springs in addition to the basic XRAY springs. The ultra-fine tuning springs have different damping and compression characteristics that fall between the range of the basic springs. All 4 springs within the set have the same length and damping characteristics.
|
|
|
XRAY Selected Ultimate Racing Springs (24)
#308390
Ultimate high-performance racing springs, which provide precision tuning for your XRAY model racing car! Developed from extensive testing and racing experience, these racing springs were designed and precision-crafted to have a unique spring characteristic. The XRAY spring sets were designed to give you an optimum range of choices to fine tune your car.
|
|
|
XRAY Spring-Set D=1.4 (14 LB) Yellow - Super Soft (4)
#308393
Set of four coil-springs for XRAY shock absorbers. All 4 springs within the set have the same length and damping characteristics.
Colour: Yellow
Tension: Very Soft
NOT interchangeable with yellow springs for Serpent shocks - 308096 Spring-set D=1.6 Yellow (2+2)
|
|
|
XRAY Spring-Set D=1.5 (17.5 LB) White - Soft (4)
#308394
Set of four coil-springs for XRAY shock absorbers. All 4 springs within the set have the same length and damping characteristics.
Colour: White
Tension: Soft
NOT interchangeable with yellow springs for Serpent shocks - 308095 Spring-set D=1.5 White (2+2)
|
|
|
XRAY Spring-Set D=1.8 (33 LB) Purple - Medium-Hard (4)
#308397
Set of four coil-springs for XRAY shock absorbers. All 4 springs within the set have the same length and damping characteristics.
Colour: Purple
Tension: Medium-Hard
NOT interchangeable with purple springs for Serpent shocks - 308093 Spring-set D=1.3 Purple (2+2)
|
|
|
Set of Ceramic Ball-Bearings (14)
#309002
Set of 14 high-performance ceramic ball-bearings for XRAY touring cars. Set of 5x10x4 bearings (10pcs) and 10x15x4 bearings (4pcs).
|
|
|
Silicone Grease 00
#309500
Super differential silicone lube in a resealable syringe. This is the best Ball Differential lubricant combined with the easiest applicator on the market.
|
|
|
Silicone Oil 20W
#309520
Specially developed silicone shock oil, temperature resistant, low foaming formula. Advised to use in XRAY and any other shock absorbers.
|
|
|
Tires XXT-M for Asphalt (2)
#309617
Rubber tires specially developed for medium & high-grip asphalt. Fits most popular sizes of wheels and inserts. Set of 2.
|
|
|
Body Stratus 2.0 + Accessories (Protoform)
#309720
Stratus (ver 2.0) body made from high-strength Lexan® fits 1:10th scale electric touring cars such as the XRAY T4. Includes window mask, add-on wing, and mounting hardware.
|
|
|
Precision Balancing Chassis Weights (4 pcs.)
#309840
A complete set of 4 chassis balancing weights (2x 5g + 2x 10g) and mounting hardware. Designed for XRAY electric & nitro touring car to be mounted at pre-drilled chassis holes; also fits other race cars as well. Made from steel and laser engraved with the weight value for easy identification.
|
|
|
Balancing Chassis Weights (Center - 3 pcs)
#309850
Precision chassis weights
A complete set of 3 chassis balancing weights and mounting hardware. Designed for XRAY T1 to be mount at the pre-drilled holes at the center of the chassis but fits any other race car as well. Made from brass.
|
|
|
Spring-Set C=3.6 - Soft-Medium Hard - Rear (2)
#338286
XRAY rear spring set for NT1. Different spring tensions to fine tune your car. Powder-coated for easy identification. Developed from extensive testing and racing experience, these racing shock springs were designed and precision-crafted to have a unique spring characteristic. Set of 2 springs.
|
|
|
Spring-Set C=4.5 - Medium-Medium Hard - Rear (2)
#338287
XRAY rear spring set for NT1. Different spring tensions to fine tune your car. Powder-coated for easy identification. Developed from extensive testing and racing experience, these racing shock springs were designed and precision-crafted to have a unique spring characteristic. Set of 2 springs.
|
|
|
XRAY Springs - Set D=1.9 (35 LB) Light Red - Hard - Rear (2)
#338288
XRAY rear spring set for NT1. Different spring tensions to fine tune your car. Powder-coated for easy identification. Developed from extensive testing and racing experience, these racing shock springs were designed and precision-crafted to have a unique spring characteristic. Set of 2 springs.
|
|
|
XRAY Springs - Set C=4.0 - Medium - Rear (2)
#338296
XRAY rear spring set for NT1. Different spring tensions to fine tune your car. Powder-coated for easy identification. Developed from extensive testing and racing experience, these racing shock springs were designed and precision-crafted to have a unique spring characteristic. Set of 2 springs.
|
|
|
XRAY Springs - Set C=5.0 - Medium-Hard - Rear (2)
#338297
XRAY rear spring set for NT1. Different spring tensions to fine tune your car. Powder-coated for easy identification. Developed from extensive testing and racing experience, these racing shock springs were designed and precision-crafted to have a unique spring characteristic. Set of 2 springs.
|
|
|
XRAY Premium Silicone Oil 100 cSt
#359210
XRAY Premium Silicone Oil 100 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel.
|
|
|
XRAY Premium Silicone Oil 150 cSt
#359215
XRAY Premium Silicone Oil 150 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel.
|
|
|
XRAY Premium Silicone Oil 200 cSt
#359220
XRAY Premium Silicone Oil 200 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel.
|
|
|
XRAY Premium Silicone Oil 250 cSt
#359225
XRAY Premium Silicone Oil 250 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel.
|
|
|
XRAY Premium Silicone Oil 300 cSt
#359230
XRAY Premium Silicone Oil 300 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel.
|
|
|
XRAY Premium Silicone Oil 400 cSt
#359240
XRAY Premium Silicone Oil 400 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel.
|
|
|
XRAY Premium Silicone Oil 450 cSt
#359245
XRAY Premium Silicone Oil 450 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel.
|
|
|
XRAY Premium Silicone Oil 500 cSt
#359250
XRAY Premium Silicone Oil 500 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel.
|
|
|
XRAY Premium Silicone Oil 550 cSt
#359255
XRAY Premium Silicone Oil 550 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel.
|
|
|
XRAY Premium Silicone Oil 600 cSt
#359260
XRAY Premium Silicone Oil 600 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel.
|
|
|
XRAY Premium Silicone Oil 700 cSt
#359270
XRAY Premium Silicone Oil 700 cSt is manufactured in Europe by a specialized silicone oil premium manufacturer, these new oils were exclusively created for XRAY. Each batch of premium oil is laboratory tested and calibrated to ensure the highest possible consistency and quality from batch to batch. Based on the industry-proven CST rating, the new line of oils will be easy to identify, adjust, and feel.
|
|
|
Ball End 4.9mm with 4mm Thread (2)
#362648
Threaded 4.9mm ball end with 4mm thread length for connection to molded ball joints. Set of 2. Direct replacement for #302652 steel balls.
|
|
|
Ceramic Ball 2.4mm (12)
#930220
Set of 12 premium-quality ceramic balls made from extra-hard Si3N4 silicone nitride ceramic. Significantly improves differential lifespan while reducing friction and vibration. Higher RPM capabilities.
|
|
|
Ceramic Ball-Bearing Axial F3-8 3x8x3.5
#930238
High-precision axial thrustbearing 3x8x3.5mm for ball differential features ceramic balls. Highest-quality material and design guarantees the smoothest diff operation and increased life. Ceramic balls in the axial cage are made from extra-hard Si3N4 silicone nitride ceramic. Significantly improves differential lifespan while reducing friction and vibration. Higher RPM capabilities.
|
|
|
CH-Clip 8 (2)
#966080
8mm CH-clip. To ensure smoother, more precise operation of the XB2 and XB4 differential, the CH clips used inside the differential are manually ground. Set of 2.
|
|
|
Pin 1.5x8.8 (10)
#980159
Polished chrome pin. Dia. x length = 1.5mm x 8.8mm. Set of 10 pieces.
|
|
ID |
Product Name |
Released |
305784-O |
|
May 27, 2019 |
305866-O |
|
May 27, 2019 |
305870-O |
|
May 27, 2019 |
305880-O |
|
May 27, 2019 |
301210 |
|
Jan. 29, 2019 |
301232 |
|
Dec. 13, 2018 |
303125-O |
|
Sep. 10, 2018 |
941014 |
|
Mar. 21, 2018 |
305869 |
|
Nov. 14, 2017 |
305221 |
|
Sep. 06, 2017 |
305334 |
|
Sep. 06, 2017 |
303140-O |
|
Aug. 03, 2017 |
301228 |
|
Apr. 19, 2017 |
305772 |
|
Apr. 11, 2017 |
305776 |
|
Apr. 11, 2017 |
305779 |
|
Apr. 11, 2017 |
303126-K |
|
Mar. 24, 2017 |
303144-O |
|
Feb. 28, 2017 |
302335 |
|
Feb. 01, 2017 |
302336 |
|
Feb. 01, 2017 |
| |
|
|